7/14/2023 0 Comments Modem vs router vs access pointI also find from experience that naming the SSID the same on different bands (2.4Ghz/5.0Ghz) causes a great deal of issues too. See Also: How to configure a Wireless Router as an Access Point? If running an Ethernet cable is not feasible, one can use newer " mesh network" devices that use multiple radios, one for "dedicated backhaul" and others for serving clients. Repeaters typically reduce wireless speed in half and introduce some noise. Notes: It may be beneficial to use two access points (set on different, non-overlapping channels, with the same SSID/security) instead of range extenders/repeaters to extend wireless network coverage if a cable between your main router and the secondary access point is not an issue. Although range extenders/repeaters reach areas beyond the range of the central router, they also bounce back all the router's traffic, creating congestion and slowing the network. access point mode), however - it essentially halves your wireless bandwidth, as it has to use it to communicate with both your main AP and the clients. using an access point (or setting a device in repeater vs. There is a downside to using a repeater vs. The advantage to using a repeater/range extender is there is no need for a cable between the main router/modem and the repeater. Extenders are usually devices that only do repeating, and can't be set in any other mode. Extender has the same functionality as a repeater. Many routers/access points can be configured in " repeater" mode. Repeater is a wireless network device that repeats wireless signals to extend range without being connected with cable to either your router/modem, or your clients. Access point is a device connected with cable ( Cat5) to your main router/modem/internet, and serving clients wirelessly.
0 Comments
Leave a Reply. |